Onsite Group: Safe Removal & Reinstatement of Façade Elements for Defect & Rectification Work Copy

Introduction

Façade elements, such as cladding panels, are commonly removed to install concealed service conduits, track water leaks, inspect substrates, and repair damage. If the panels are not correctly re-installed, there is a risk that the panels could be loosened and dislodged by high winds and vibration, and this is an unacceptable risk for damage and personal injury.

Incident investigation has shown the causes of this risk.

Purpose

The purpose of this training module and knowledge assessment is to provide assurance that personnel who carry out cladding rectification work are competent to do so safely.

Outcome

A certificate will be issued to confirm successful completion

Prerequisites

Participants should be competent façade workers. This training module does not include knowledge or skills beyond Onsite’s approved rectification procedures, and assumes that participants are competent to safely carry out façade work at height, work with mobile plant, and use powered tools.

This training module should be made available to any personnel involved in this process, including other trades who need to remove and replace panels (eg electrical, data, waterproofing, engineering inspection)

Aim

The aim of this training module is to ensure that relevant personnel are competent to remove and replace metal cladding panels, so there is no residual risk of damage or injury from a panel breaking free from the façade.

Objectives

At the successful completion of this training module, participants will be able to:

1. Describe the risks that may result from incorrect cladding panel removal and replacement
2. Describe the approved procedure for removal and replacement of cladding panels
3. List the options for correct cladding panel re-installation
4. List the materials and tools required to complete the task correctly and safely
5. Describe the documentation required to complete these works

Resources

Reference documents:

Onsite Policies:        Defect Investigation & Rectification; As-Built Documentation

Onsite Procedure:    Safe Removal & Reinstatement of Façade Elements for Defect & Rectification Work

Case Study:            Panel dislodgement incident

Assessment

Assessment is progressive, at the completion of each module topic.

Pass is 100%.

Incorrect responses require repeat of topic & re-assess.